Home Activities Scientific Activities Conferences
Konferensiyalar

INTERNATIONAL SCIENTIFIC-PRACTICAL CONFERENCE IN THE FRAMEWORK OF THE TASHKENT FASHION WEEK

Print

Scientific-practical conference
Topic: "Innovation and modern technology in the fashion industry. FASHION-2016 "
Scientific-practical conference includes following sections:
1. Innovation in design and technology of light industry
2. Modern trends and prospects for the creation of new structures and the design of materials for garments.
3. Innovative marketing and branding in the fashion industry.


In the conference can attended scientists, art historians, designers and leading experts of the textile and garment enterprises, teachers and students of Uzbek and foreign higher educational institutions.
By the organizing Committee envisaged publishing the collection of scientific articles.

Requirements to the article:
1.    The article should be not less than 3 and no more than 5 pages in A4 format (210x297mm), text editor Microsoft Word, font - Times New Roman, size - 12, line spacing 1.0, all margins - 2.5 cm .
2.    At the center with capital and bold letters the name of the article. Below the header, information about the author of the article: name, position and title (no more than three co-authors), the next line place of work of the author. On the next line brief abstract of the article.

Materials are accepted daily from 15:00 to 17:00 in the "Center for Innovation, integration and scientific research" (building-1, room-204) from September 13 to October 10.
e-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it


ADDRESS OF THE ORGANIZING COMMITTEE
5, Shokhjahon street, Tashkent, Uzbekistan, 100100.
 
 

“Innovative ideas and development of talented youth in the modernization in the conditions of technics and technologies”

Print

Scientific-practical conference on “Innovative ideas and development of talented youth in the modernization in the conditions of technics and technologies” has been held at Tashkent institute of Textile and Light Industry on may 5-6 in 2016.
Professors and teachers of higher educational institutions, industrial specialists and scientists, senior scientific researches, young scientists and talented youth participated in 5 sessions of the conference with about 350 theses.
Enlarged meeting of the educational-scientific complex aimed on integration of higher education and science, improving efficiency of academicians in preparation of qualified specialists, widened involvement of youth to scientific activity has been held within the framework of the conference.
Representatives of the Scientific Research Center of Physics and Chemistry of Polymers under National University of Uzbekistan, institute of Seismic Stability of Buildings of the Academy of Sciences of the Republic of Uzbekistan, Scientific Research Center for Problems of Sectoral Machinery under the Tashkent State Technical University, SC “Pakhtasanoat ilmiy markazi”, Center “Sifat” under the Cabinet of Ministers, Uzbek Scientific Research Institute of Natural Fibers, SC “Uzbekyengilsanoat”, SUC “Fan va tarakkiyot” under the Tashkent State Technical University and other industrial organizations participated in it. Further plans and development strategies of the innovative corporate cooperation between science, education and manufacture were discussed between them.
 
 

Scientific-practical conference on the theme “XXI century - the century of the younger intellectual generation”.

Print

MINISTRY OF HIGHER AND SECONDARY SPECIAL EDUCATION OF UZBEKISTAN

TASHKENT INSTITUTE OF TEXTILE AND LIGHT INDUSTRY


March 29-30, 2016 TITLI held scientific-practical conference on the theme “XXI century - the century of the younger intellectual generation”. The conference is open to all students, masters, who are engaged in scientific work, senior scientists, researchers.
The conference will run sections and subsections:
1. Young chemists (chemical technology, printing and packaging technology);
2. Young technology (processing of natural fibers, silk, spinning, textile materials, textile materials science, design and technology of sewing, leather goods, costume design);
3. Young mechanics (production machines, service and office equipment, automation of production and processes, and management)
4. Interns education (social, economic, professional and science).
Working languages: Uzbek, Russian and English languages.
Articles should conform to the above topics and authors are responsible for the data presented in the works. Conference proceedings are published in a collection. In one article is payable 10,000 (ten thousand) soums.
Requirements for registration
Articles should be in 2 copies and have an electronic version. The paper should be 2-3 pages in full, in A4 format (210x297 mm) on white paper (signed by the author and scientific advisor), in the font Times New Roman, font size 12, spacing 1.0, in Microsoft Word 2003 text editor, in RTF format from all sides should be 25 mm to paragraph 1.25 cm.
1. At the center of the first page the name of the article is written large and bold letters, line 2 is left blank (1 interval), 3 line in the center of the written title, position, capital letters initials and surname of the author, with 4 lines from the middle of the indicated place of work (name of student), 5 line is left blank, with 6-line articles are published.
2. The number of authors should not exceed 3 people, you cannot use links and automatic digitizing.
3. Drawings, histograms, charts, and other graphical information in the form .JPG should not be scanned, and hold on the sheet is not more than 25% space.
4. In the electronic version of the name of the file you need to execute the section number, name author in Latin letters (for example: 1-A.P.Mavlyanov, if there are two articles of one author, the 1-A.P.Mavlyanov-1, 1-A.P.Mavlyanov-2).
5. Article shall comply with the above sections and execute correctly, without spelling and semantic errors.
6. Articles are accepted in TSIIND TITLI (3-body, 23-room) from 1500 to 1700 from 25 January until 20 February. E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Remember: if the work submitted do not comply with or without speech at the conference, these works are not published.

ORGANIZING COMMITTEE ADDRESS:
100100, Tashkent, st. Shohzhahon, 5, tel .: (998 71) 253-19-59
 
 

INFORMATION about Republican scientific-practical conference on “Actual problems of innovative technologies in integration conditions of science, education and manufacture”

Print

Scientific-practical conference on “Actual problems of innovative technologies in integration conditions of science, education and manufacture” was held at the Tashkent institute of Textile and Light Industry in November 10-11 2015.
Professors and teachers of higher educational institutions, industrial specialists and scientists, senior scientific researches, young scientists and talented youth participated in 5 sessions of the conference with about 350 theses.
Enlarged meeting of the educational-scientific complex aimed on integration of higher education and science, improving efficiency of academicians in preparation of qualified specialists, widened involvement of youth to scientific activity was held within the framework of the conference.
Representatives of the Scientific Research Center of Physics and Chemistry of Polymers under National University of Uzbekistan, institute of Seismic Stability of Buildings of the Academy of Sciences of the Republic of Uzbekistan, Scientific Research Center for Problems of Sectoral Machinery under Tashkent State Technical University, SC “Pakhtasanoat ilmiy markazi”, Center “Sifat” under the Cabinet of Ministers, Uzbek Scientific Research Institute of Natural Fibers, SC “Uzbekyengilsanoat”, SUC “Fan va tarakkiyot” under  Tashkent State Technical University and other industrial organizations participated in it. Further plans and development strategies of the innovative corporate cooperation  were discussed between science,education and manufacture.
   

 
 

Axborot xati

Print

  O‘ZBEKISTON RESPUBLIKASI
OLIY VA O‘RTA MAXSUS TA’LIM VAZIRLIGI
TOSHKENT TO‘QIMACHILIK VA YYENGIL SANOAT INSTITUTI

AXBOROT XATI

   Sizga shuni ma’lum qilamizki, 2017 yil 12-13 dekbar kunlari Toshkent tо‘qimachilik va yengil sanoat institutida “Texnika va texnologiyalarni modernizatsiyalash sharoitida iqtidorli yoshlarning innovatsion g‘oyalari va ishlanmalari” mavzusidagi О‘zbekiston Respublikasi Oliy va о‘rta maxsus ta’lim vazirligi miqyosidagi ilmiy-amaliy anjumani о‘tkaziladi. Anjumanga ilmiy-amaliy tadqiqot ishlarni olib borayotgan barcha iqtidorli yoshlar taklif etiladi.

                                                                                   Anjumanda quyidagi shо‘balar ish olib boradi:
1. Paxta sanoatida mexanika muammolari va innovatsion yechimlar.
2. Tо‘qimachilik sanoatini innovatsion texnologiyalar asosida rivojlantirish, texnika va texnologiyalarini modernizatsiyalash.
3. Yengil, kimyo va matbaa sanoati ishlab chiqarishida innovatsion texnologiyalar.
4. Fundamental, ijtimoiy-gumanitar, iqtisodiy fanlarda hamda kasbiy ta’limda innovatsion texnologiyalar.
5. Talaba-yoshlar ongiga milliy va umuminsoniy qadriyatlarni singdirishning muhim jihatlari.

Anjuman ishchi tillari: о‘zbek, rus va ingliz. Yozilgan ishlar yuqoridagi shо‘balardan biriga mos kelishi lozim va ularda keltirilgan g‘oyalar, dalillar va raqamlarga mualliflar javobgardir.
Anjuman materiallari tо‘plam shaklida chop etiladi. Tо‘plam qisman qatnashchilarning badal mablag‘lari hisobidan nashr etilishi munosabati bilan mualliflardan har bir maqola uchun 15 000 (о‘n besh ming) sо‘m miqdorida mablag‘ yuborish sо‘raladi.

Rasmiylashtirish talablari
Materiallarda ishning mazmun mohiyati aniq, tushunarli bayon etilishi lozim. Maqolalar 2 nusxada (2-nusxasiga qabul qilgan xodim tomonidan imzo qо‘yib muallifga qaytarib beriladi) va elektron variantda muallaliflar tomonidan taqdim etiladi.
Matnlar hajmi tỹliq 3 yoki 4 bet, A4 formatli (210x297 mm) oq qog‘ozda (rahbar yoki hammuallif professor-о‘qituvchi imzosi bilan), 14 о‘lchamli shriftda, 1,0 interval bilan Microsoft Word 2003, Word 2010 va undan yuqori tahrirlarda, Times New Roman shriftida hamma tomondan 25 mm hoshiya va xat boshi(abzats)ga 1,25 sm joy qoldirib tayyorlanadi.

1. Birinchi qatorning chap tomonida qalin harflarda UDK raqami keltiriladi,
2-qatorda BOSH VA QALIN HARFLARDA MAVZUNING NOMI sahifaning о‘rtasida,
3-qator bо‘sh qoldiriladi, 4-qatorda о‘ng tomonda muallifning unvoni va lavozimi, ismi – sharifining faqat bosh harflari va familiyasi; 5-qatorda о‘ng tomonda ish joyi (tashkilot nomi) kо‘rsatiladi.
2. 1,0 interval tashlab о‘zbek, rus va ingliz tillarida  qisqa annotatsiya (kursiv holatda, har bir tilda yozilgan annotatsiya hajmi 4 qatorgacha) beriladi. Keyin 1,0 interval tashlab maqolaning asosiy matni keltiriladi.
3. Mualliflar soni 3 tadan kо‘p bо‘lishi, matnda avtomatik raqamlash va boshqa avtomatik tarzda bajariluvchi buyruqlardan hamda avtomatik havola (ssilka) dan foydalanish mumkin emas. Havolalar foydalanilgan adabiyot raqamini kо‘rsatgan holda quyidagi kо‘rinishda keltiriladi: .....keltirilgan [2].
4. Materiallardagi barcha sxema, gistogramma, diagramma va boshqa grafik ma’lumotlar tartib bilan raqamlangan holda va .jpg formatida (har bir rasm hajmi kо‘pi bilan 500 Kb gacha, skaner qilib kо‘chirilmagan, 1 varaq hajmining 50 % idan ortiq joyni egallamagan va aniq kо‘rinishda) bо‘lishi lozim.
5. Elektron nusxadagi fayl nomi seksiya raqami bilan lotin alifbosida birinchi muallifning ismi familiyasi kо‘rinishida bо‘lishi kerak (Masalan: 1-seksiyadagi fayl nomi
1-A.P.Mavlyanov, agar maqola 2 ta bо‘lsa 1-A.P.Mavlyanov-1 va 1-A.P.Mavlyanov-2 va h.k.).
6. Matn oxirida asosiy foydalanilgan adabiyotlar rо‘yxati keltiriladi.
7. Maqola kompyuterda matn terish qoidalariga amal qilgan holda tayyorlanishi, grammatik, orfografik va boshqa xatolardan holi bо‘lishi, yuqoridagi shо‘balardan biriga mos kelishi hamda ilmiy va ma’no jihatdan tugallangan bо‘lishi lozim.
8. Maqolalar IIITM da (1-bino, 204-xona) har ish kuni soat 15:00 dan 17:00 gacha 
5 oktabrdan 10 noyabrgacha qabul qilinadi. Belgilangan muddatdan kechiktirilgan maqolalar qabul qilinmaydi. E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

ESLATMA: yuqorida keltirilgan talablarga mos kelmagan va anjumanda ma’ruza qilinmagan maqolalar chop etilmaydi.

TASHKILIY QО‘MITA MANZILI
100100, Toshkent, Shoxjahon kо‘chasi, 5, tel.: (998 71) 253-19-59.
 
 

Page 1 of 4

Our Address

5, Shohjahon Street, district Yakkasaroy, Tashkent, Uzbekistan


The number of confidence:
0-371-253-32-02
0-371-253-36-17

titlp_info@edu.uz
rector@titli.uz

The number of confidence:

 1006

Useful Websites

www.press-service.uz
O`zbekiston Respublikasi Prezidentining matbuot xizmati
www.gov.uz
O‘zbekiston Respublikasining Hukumat portali
www.universityjournal.ru
НОВЫЙ УНИВЕРСИТЕТ- рецензируемый научный журнал
www.ziyonet.uz
Axborot ta`lim tarmog`i
www.lex.uz
Qonun hujjatlari ma`lumotlari milliy bazasi
www.edu.uz
O`zbekiston Respublikasida ta`lim
www.magisterjournal.ru
ВЕСТНИК МАГИСТРАТУРЫ - Научный журнал

Статистика

No valid database connection Table './titli-new/jos_jstats_ipaddresses' is marked as crashed and should be repaired SQL=SELECT count(*) AS nbr_of_visits, w.tld AS tld, t.fullname AS full_name, count(*) AS total_visits FROM jos_jstats_ipaddresses w LEFT JOIN jos_jstats_topleveldomains t ON(t.tld = w.tld) LEFT JOIN jos_jstats_visits v ON(v.visitor_id = w.id) WHERE (1=1) AND (1=1) AND w.type=1 GROUP BY tld ORDER BY nbr_of_visits DESC, t.fullname ASC
Top 0:
0 visits from 0 countries